The building lighting cloud energy-saving controller integrates remote centralized control and single lamp control. It can realize the status control of output lines and single lamps, complete data collection at the same time, reflect the current operating status of the lighting system in real time, and realize remote intelligent monitoring and management of building lighting systems. , intelligent operation and maintenance.
The building lighting cloud energy-saving controller has the characteristics of strong operability, high integration and good stability, and is widely used in building monitoring, landscape control, hospitals, schools and other smart building switch control systems.
Install the EAC floor light network lighting switch controller in the power distribution box of the floor, and execute the switch output corresponding to the control circuit, which is used for incandescent lamps, electronic voltage regulators, and LED dimming lamps (T5/T8 fluorescent tubes and downlights) Wait for the lighting equipment to start and stop control, and feedback the load operation status in real time.
1. Manual forced start function
In the event of system failure, the normal use of the user is ensured;
2. Remote control
The user can realize the data interaction with the equipment through the monitoring center, understand the operation of the system equipment in real time, and make real-time adjustments according to the user's needs;
3. Direct load, no contactor required
The 3KW/way load capacity directly drives the lamp load without additional contactors, and is used for centralized management and control of lighting in each floor/area;
4. 128 scene control modes
Through the LCD control panel that comes with EAC, users can set up to 128 scene control modes;
5. Easy to operate
Good human-machine interface (HMI), no programming, no debugging, large integration, high cost performance; equipped with cloud platform, the operation control of system settings can be easily realized through mobile phone or computer.
6. Kinds of communication interfaces
The powerful building light networking communication interface can be used in any new construction and renovation projects!
Category |
name |
model |
Output (dimming) interface |
Building light networking cloud controller |
switch module |
EAC104 | 4-way X16A switch module |
EAC104i | 4-way X16A switch module, each with its own current detection | ||
EAC108 | 8-way X16A switch module | ||
EAC108i | 8-channel X16A switch module, each with its own current detection | ||
EAC112 | 12-way X16A switch module | ||
EAC112i | 12 X16A switch modules, each with its own current detection |
◆Chinese LCD menu (keyboard)
Simple and clear, ordinary electricians can operate it, and it is easy to debug on site without bringing a notebook
◆No programming and debugging
All functional modules are solidified and stored in the chip, users do not need to program, just select and confirm the required functional modules; users do not need to debug, saving a lot of project implementation costs for integrators
◆Built-in clock and power supply
Any device can be used as the main clock of the system or can receive external clock signals to ensure that the system works in step; its own power supply: no external power supply is required.
◆Multiple light networking bus interfaces, flexible networking mode
Uplink communication TCP/IP, RS485 and EIB/i_BUS three bus structure, to ensure the designer's flexible design, including standard TCP/IP bus;
Downlink communication RS485, DALI interface dual bus structure to ensure low-cost construction, including standard RS485 interface;
According to customer needs, GPRS module can also be installed as an option to complete remote control. The specific interface is configured according to the model and consult our technical engineer.
Operating Voltage | 85-265vac |
rated power | Less than 30W |
Output circuit | Road 4, 8, and 12 are available |
Output load | 16A (blocking) |
show | 128*64LED display (with backlight) |
Communication port | RS485, RS232, GPRS, Ethernet |
Communication network address | The default value (192.168.001.002) |
The port number | Default value (01200) |
Server IP | The default value (192.168.001.254) |
IP port | Default value (05002) |
IP protocol | UDP |
Operating temperature | -10°C to 55°C (no icing) |
Protection class | IP20 |
Working humidity | <90% |
Equipment size | 260*115*90(mm) |
equipment weight | About 2Kg |